Hole 3
 
 

Shaft 2
 
 

Slot 1
 

Figure 2-2: Shaft 2

 

3.    Shaft 2 is hollow.  This shaft will be press fit around the outer diameter of the bearing.  This will allow for some space between the shaft 1 and             shaft 2.

4.    There are slots cut in this shaft.  Slot 1 should be lined up with hole 2 on shaft 1.

 

Figure 2-3: Completed Pendulum Stem

5.    The pendulum stem is a part that will go in one of the holes of the small diameter shaft.  There is a pinhole connected to the top.