Fundamentals of Engineering Thermodynamics by Richard E. Sonntag, Claus Borgnakke, & Gordon J. Van Wylen. SIXTH Edition, John Wiley & Sons, Inc. (2002) ISBN 0-471-15232-3. (Hardcover)
OR:Introduction to Engineering Thermodynamics by Richard E. Sonntag & Claus Borgnakke. Second Edition, John Wiley & Sons, Inc. (2007) ISBN-10 0-471-73759-3; ISBN-13 978-0-471-73759-9/ (Softcover)
| Tuesday | Thursday | |||
|---|---|---|---|---|
| 1/5 | 1/7 |
Topics: Introductory Comments
Read: Chapter 1 HW: |
||
| 1/12 |
Topics: Concepts and Definitions
Read: Chapter 2 HW: | 1/14 |
Topics: Properties of a Pure Substance
Read: 3.1-3.3 HW: Click here |
|
| 1/19 |
Topics: Properties of a Pure Substance
Read: 3.4-3.5 HW: Click here | 1/21 |
Topics: Properties of a Pure Substance
Read: HC: 3.6 SC: 3.6-3.7 HW: Click here |
|
| 1/26 |
Topics: Work and Heat
Read: 4.1-4.3, 4.5, 4.6 HW: Click here | 1/28 |
Topics: Work and Heat
Read: Chapter 4 Review HW: Click here |
|
| 2/2 |
HW: Click here | 2/4 |
|
|
| 2/9 |
Topics: First Law of Thermo, Internal Energy, Enthalpy
Read: 5.1-5.5 HW: | 2/11 |
Topics: Specific Heat, Ideal Gases
Read: 5.6-5.7 HW: Click here |
|
| 2/16 |
Topics: 1st law formulations
Read: 5.8, Chapter 5 Review. HW: Click here | 2/18 |
Topics: SSSF
Read: 6.1-6.4 HW: Click here |
|
| 2/23 |
Topics: SSSF
Read: Chapter 6 review. HW: Click here | 2/25 |
HW: Click here |
|
| 3/2 |
| 3/4 |
Topics: 2nd Law, Carnot Cycle, Temperature
Read: qs2nd, 7.1-7.3, 7.5-7.9 HW: |
|
| 3/9 |
| 3/11 |
|
|
| 3/16 |
Topics: 2nd Law, Carnot Cycle, Temperature
Read: qsrev, 7.1-7.3, 7.5-7.9 HW: Click here | 3/18 |
HW: Click here |
|
| 3/23 |
Topics: Entropy
Read: first part of qsent, 8.1-8.5 HW: Click here | 3/25 |
Topics: Entropy Changes, Polytropic Proc.
Read: HC: 8.9-8.11 SC: 8.6-8.8 HW: Click here |
|
| 3/30 |
Topics: More Entropy, Irreversible Processes
Read: 7.4, HC: 8.6-8.8 SC: 8.9-8.11 HW: Click here | 4/1 |
Topics: 2nd Law for CV, Entropy & SSSF
Read: 8.12, 9.1-9.2 HW: Click here |
|
| 4/6 |
Topics: Entropy and SSSF Processes
Read: 9.4 HW: Click here | 4/8 |
Topics: Reversible shaft work
Read: HC: 9.3, 9.5-9.6 SC: 9.3, 9.5, 9.8 HW: Click here |
|
| 4/13 |
HW: Click here | 4/15 |
|
|
| 4/20 |
Topics: Efficiency
Read: HC: 9.3, 9.5-9.6 SC: 9.3, 9.5, 9.8 HW: | 4/22 |
HW: Click here |
|
| Wednesday, April 28, 3:00-5:00 pm, in P414: Comprehensive Final |
Grading is at the discretion of the instructors and grader.
Your numerical grade will normally be computed as follows:
| Homework | 15% |
| Exam 1 | 20% |
| Exam 2 | 20% |
| Exam 3 | 20% |
| Final Exam | 25% |
Your letter grade will then be assigned according to the following table:
| Numerical Grade | Letter Grade |
|---|---|
| 0-44 | F |
| 45-58 | D |
| 59-72 | C |
| 73-86 | B |
| 87-100 | A |