Boundary layer coordinates:
Note that despite their names, x and y are not Cartesian coordinates. Neither are u=Dx/Dt and v=Dy/Dt Cartesian velocity components.
Exercise:
Identify the boundary layer coordinates and velocities for flow around a circular cylinder in terms of the usual polar variables.
Laminar boundary layer equations:
Seen on the small transverse boundary layer length scale, the boundary layer coordinate system looks approximately Cartesian:
Continuity:
x-Momentum:
y-Momentum:
An example of a boundary layer solution is Stokes' second problem, the
impulsively started flat plate, in which v=0 and . This is an exact solution
of the Navier-Stokes, as well as of the boundary layer equations. Note
that the thickness of this boundary layer is indeed proportional to
.
Exercise:
Write the unsteady boundary layer equations for the boundary layer around a circular cylinder and compare with the full Navier Stokes equations in polar cordinates for the flow. Identify the terms in the full Navier Stakes equations that are ignored in the boundary layer approximation, and explain why these are indeed small.
Boundary conditions at a solid, stationary, impermeable wall:
Boundary conditions above the boundary layer follow from the fact that directly above the boundary layer, there is a ``matching'' region in which both the boundary layer solution and the potential flow solution are valid approximations:
In the matching region, as far as the potential flow is concerned y
is small, but as far as the boundary layer solution is concerned,
. Since y is small, the velocity u=ue(x,t) is
approximately the wall slip velocity found from the potential flow solution
(in which the thin boundary layer is ignored.) But the velocity ue must
also be the velocity in the boundary layer solution for
.The same holds for the pressure:
Note that is constant, since the Bernoulli
law applies in the matching region.
Exercise:
Identify the velocity ue at the outer edge of the boundary layer around the impulsively started circular cylinder (i.e, in the matching region). Also identify the pressure p(x,y,t) at any arbitrary point inside this boundary layer.