Losses in Pipe Flows
Major Losses: due to friction, significant head loss is associated with the straight portions of pipe flows. This loss can be calculated using the Moody chart or
Minor Losses: Additional components (valves, bends, tees, contractions, etc) in
pipe flows also contribute to the total head loss of the system. Their contributions
are generally termed minor losses.
The head losses and pressure drops can be characterized by using the loss coefficient,
One of the example of minor losses is the entrance flow loss. A typical flow pattern
for flow entering a sharp-edged entrance is shown in the following page. A vena
contracta region if formed at the inlet because the fluid can not turn a sharp corner.
Flow separation and associated viscous effects will tend to decrease the flow energy
and the phenomenon is complicated. To simplify the analysis, a head loss and the
associated loss coefficient are used in the extended Bernoulli’s equation to take into
consideration of this effect as described in the next page.